APC Rack PDU 2G Metered by Outlet with Switc
For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
|
APC Rack PDU 2G Metered by Outlet with Switc
|
Beskrivelse
Specifikationer
Rack PDU 2G, Switched Plus, ZeroU, 30A, 200/208V, (21) C13 & (3) C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Output
Nominal Output Voltage: 200V,208V
Maximum Total Current Draw per Phase: 30A
Output Connections: (21) IEC 320 C13
|
(3) IEC 320 C19 |
|
Input
Nominal Input Voltage: 200V,208V,230V
Input Frequency: 50/60 Hz
Regulatory Derated Input Current (North America): 24A
Input Connections: NEMA L6-30P
|
Acceptable Input Voltage: 200-240 VAC
Maximum Line Current per phase: 30A
Maximum Input Current per phase: 30A
Physical
Maximum Height: 1829.00 mm
Shipping Weight: 10.50 KG
Shipping Height: 2038.00 mm
Shipping Width: 162.00 mm
Shipping Depth: 118.00 mm
Environmental
Operating Environment: -5 - 45 °C
Operating Relative Humidity: 5 - 95%
Operating Elevation: 0-3000 meters
Storage Temperature: -25 - 65 °C
Storage Relative Humidity: 5 - 95%
Storage Elevation: 0-15000 meters
Conformance
Regulatory Approvals: cUL Listed,FCC Part 15 Class A,ICES-003,UL Listed,VCCI Class A
Standard Warranty: 2 years repair or replace
Environmental Compliance: RoHS,REACH: Contains No SVHCs,Contains Lithium Battery
Features
Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.
Features & Benefits
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
An IT-ready, scalable monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.
PDU-typer | Omskiftet |
Rackkapacitet | 0U |
Produktfarve | Sort |
AC udgange, antal | 24 AC stikkontakt(er) |
Strømstik | NEMA L6-30P |
Kabellængde | 3 m |
Nominel indgangsspænding | 200-230 V |
Vekselstrømsindgangsfrekvens | 50 - 60 Hz |
Strøm (maks.) | 30 A |
Nominel udgangsspænding | 208 V |
Maksimal strømtræk pr. fase | 30 A |
Strømbeskyttelsesfunktioner | Overbelastning |
Compliance-certifikater | RoHS |
Certificering | cUL,FCC 15 A,ICES-003,UL,VCCI A |
Driftstemperatur (T-T) | -5 - 45 °C |
Opbevaringstemperatur (T-T) | -25 - 65 °C |
Relativ luftfugtighed ved drift (H-H) | 5 - 95% |
Relativ luftfugtighed ved opbevaring (H-H) | 5 - 95% |
Driftshøjde | 0 - 3000 m |
Ikke-drift højde | 0 - 15000 m |
Bredde | 56 mm |
Dybde | 51 mm |
Dimensioner (BxDxH) | 56 x 51 x 1829 mm |
Højde | 1829 mm |
Vægt | 8,23 kg |
Pakkens dimensioner (BxDxH) | 162 x 118 x 2038 mm |
Pakkevægt | 10,5 kg |
Pakkebredde | 162 mm |
Pakkedybde | 118 mm |
Pakkehøjde | 2038 mm |
Samlet CO2-fodaftryk (kg of CO2e) | 8153,67 |
Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.